Fri Jul 31, 2015 7:31 pm
Transconding Nikon D5300 vids on Samsung F8000
Hi to all.
I have some problems with my F8000 TV. Wont reproduce every movie recorded using my new reflex Nikon D5300.
Same files working on a Samsung H-series, so i tried to set the same profile for the F8000 but the issue remains.
I'm on Serviio 1.5.2 and this is the file spec:
MediaServerMac:Video DLNA$ ./ffmpeg -i Dsc_0101.mov
ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers
built with llvm-gcc 4.2.1 (LLVM build 2336.11.00)
configuration: --prefix=/Volumes/Ramdisk/sw --enable-gpl --enable-pthreads --enable-version3 --enable-libspeex --enable-libvpx --disable-decoder=libvpx --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-avfilter --enable-libopencore_amrwb --enable-libopencore_amrnb --enable-filters --enable-libgsm --enable-libvidstab --enable-libx265 --disable-doc --arch=x86_64 --enable-runtime-cpudetect
libavutil 54. 27.100 / 54. 27.100
libavcodec 56. 41.100 / 56. 41.100
libavformat 56. 36.100 / 56. 36.100
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 16.101 / 5. 16.101
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.100 / 1. 2.100
libpostproc 53. 3.100 / 53. 3.100
Guessed Channel Layout for Input Stream #0.1 : stereo
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Dsc_0101.mov':
Metadata:
major_brand : qt
minor_version : 537331968
compatible_brands: qt niko
creation_time : 2015-07-14 21:02:51
Duration: 00:01:35.76, start: 0.000000, bitrate: 22076 kb/s
Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuvj420p(pc, smpte170m/bt709/bt470m), 1920x1080, 20518 kb/s, 50 fps, 50 tbr, 50k tbn, 100 tbc (default)
Metadata:
creation_time : 2015-07-14 21:02:51
Stream #0:1(eng): Audio: pcm_s16le (sowt / 0x74776F73), 48000 Hz, 2 channels, s16, 1536 kb/s (default)
Metadata:
creation_time : 2015-07-14 21:02:51
I have some problems with my F8000 TV. Wont reproduce every movie recorded using my new reflex Nikon D5300.
Same files working on a Samsung H-series, so i tried to set the same profile for the F8000 but the issue remains.
I'm on Serviio 1.5.2 and this is the file spec:
MediaServerMac:Video DLNA$ ./ffmpeg -i Dsc_0101.mov
ffmpeg version 2.7.1 Copyright (c) 2000-2015 the FFmpeg developers
built with llvm-gcc 4.2.1 (LLVM build 2336.11.00)
configuration: --prefix=/Volumes/Ramdisk/sw --enable-gpl --enable-pthreads --enable-version3 --enable-libspeex --enable-libvpx --disable-decoder=libvpx --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-avfilter --enable-libopencore_amrwb --enable-libopencore_amrnb --enable-filters --enable-libgsm --enable-libvidstab --enable-libx265 --disable-doc --arch=x86_64 --enable-runtime-cpudetect
libavutil 54. 27.100 / 54. 27.100
libavcodec 56. 41.100 / 56. 41.100
libavformat 56. 36.100 / 56. 36.100
libavdevice 56. 4.100 / 56. 4.100
libavfilter 5. 16.101 / 5. 16.101
libswscale 3. 1.101 / 3. 1.101
libswresample 1. 2.100 / 1. 2.100
libpostproc 53. 3.100 / 53. 3.100
Guessed Channel Layout for Input Stream #0.1 : stereo
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'Dsc_0101.mov':
Metadata:
major_brand : qt
minor_version : 537331968
compatible_brands: qt niko
creation_time : 2015-07-14 21:02:51
Duration: 00:01:35.76, start: 0.000000, bitrate: 22076 kb/s
Stream #0:0(eng): Video: h264 (High) (avc1 / 0x31637661), yuvj420p(pc, smpte170m/bt709/bt470m), 1920x1080, 20518 kb/s, 50 fps, 50 tbr, 50k tbn, 100 tbc (default)
Metadata:
creation_time : 2015-07-14 21:02:51
Stream #0:1(eng): Audio: pcm_s16le (sowt / 0x74776F73), 48000 Hz, 2 channels, s16, 1536 kb/s (default)
Metadata:
creation_time : 2015-07-14 21:02:51